No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
|
Shop by brand Every brand we carry.                       |
5/8” Hex drive spanner tool for 2-piece SS Piston Upgrade.
Loctite used to ensure Top Piston assembly does not come loose from bottom piston assembly
Piston Shim Kit includes: - Five .002" Cylinder Shims - Ten .004" Cylinder Shims
Set of 1/4 SAE 45D Male Stainless Steel IN and OUT fittings for TRS21
Our specialized tool for use with rebuilding the head on TRS21, makes installation of new Suction Valve O-Rings much easier.
Set of 3/8 SAE 45D Male Stainless Steel IN and OUT fittings for TRS21
Set of 38 JIC SAE 37D Male Stainless Steel IN and OUT fittings for TRS21
***Note: Neoprene is for HVAC Applications, not Extraction*** Replacement kit for Neoprene O-rings on TRS21 head used for refrigerant recovery.
Use this plate and a depth gauge to measure the Top Dead Center Clearnace of the piston/cylinder/head assembly.
Replacement kit for Viton O-rings on TRS21 head used for the Oil Extraction Market.
The kit contains all the tools (excluding a depth gauge) and supplies to install the 2 pc SS Piston Seals and correctly set the Top Dead Center Clearance (TDCC).
For use in setting corerct head clearance on units.
