Cold Traps
This highly effective Cold Trap from Across International ensures that volatile vapors will not pass through the unit and into your vacuum pump. A cold trap is a major component of laboratory efficiency and equipment longevity.
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
This highly effective Cold Trap from Across International ensures that volatile vapors will not pass through the unit and into your vacuum pump. A cold trap is a major component of laboratory efficiency and equipment longevity.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
Pump repairs and replacement are an expensive hassle. Take the guesswork out of pump protection with the XD Cryotrap. Features stainess steel construction and vacuum jacket, allowing for excellent thermal insulation. An industry-leading vapor path design allows for the rapid condensation of liquids and it comes set up for use with either dry ice or a...
Across International laboratory scale gas scrubbers are for use in many air and exhaust cleanup tasks. Gas scrubbing takes place when the exhaust enters the inlet in the round bottom flask and travels upward through the absorption column. The scrubbing fluid is pumped from the round bottom flask upwards into the shower head adapter, and then flows...
Introducing the Ai 2nd Gen -80C (-112F) T80 cold traps with a large corrosion-resistant 316L SST 5 liter trap, 316L trapping layers/vacuum connections, and PTFE encapsulated silicone sealing gasket. Upward KF25 vacuum connections provide you safer and easier vacuum tubing connection and removal. No chilling fluid required, just plug and play.Grade 316,...
The Ai 2nd Gen -40C/F T40 cold traps now all ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.In vacuum applications, a cold trap is a device that condenses all...
Introducing the Across International external condenser. This modular condenser has over 15,000 cm2 of surface area to handle large vapor loads and keep solvents out of your vacuum pump, dual 10L receiving flasks for continuous operation with minimal downtime, and a KF25 connection for easy configuration to just about all types of equipment. Common...
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
Introducing the Across International external condenser. This modular condenser has over 0.89m2 of surface area to handle large vapor loads and keep solvents out of your vacuum pump, single 50L receiving tank , and a 1.5” tri clamp connection for easy configuration to just about all types of equipment. Common applications for this condenser include powder...
The new Ai 3rd Gen -40C/F T40 cold traps all come ETL certified, standard. They have a small footprint, but at the same time, offering you the same cooling power. New features include a large 316L SST 4.6 liter trap, 316L corrosion-resistant trapping layers and vacuum connections, PTFE encapsulated silicone sealing gasket, upward KF25 vacuum connections...
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
The Ai T40 -40°C/°F cold trap is a device that condenses all vapor except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it.