Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
Ai 2L heavy wall glass beaker, recommended for Ai HP7 hot plates.
Across International one-piece glass trap for Ai 1st Gen T series -40C and -80C cold traps.Attention! This glass trap will NOT fit our new 2nd Gen T40 -40C cold traps (released 9/2018).
Ai 24/40 joint male to female glass adapter. Glass material: high borosilicate glass 3.3Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your glassware, please contact us. We check all our inventory and make sure no defective glassware is sent to our...
Ai glass 24/40 joint 75° three-way tee adapter.Height: 6 inchesWidth: 4 inchesGlass material: high borosilicate glass 3.3Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your glassware, please contact us. We check all our inventory and make sure no...
Ai 24/40 joint glass thermowell with Viton gasket, made specifically to fit Ai 2L, 5L and 10L boiling flasks.
Ai 1000mL round bottom cold trap glass collection flask, fits our TS-6 stainless steel and TG-6 glass thin film distillation systems.Glass material: high borosilicate glass 3.3.Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your glassware, please contact...
Grinding jar clamping device for Across International PQ-N04 (4x100ml) planetary ball mills. Size is 3.9"W x 4.7"H.
Bent PT100 water bath heater thermocouple for Across International SolventVap 5L, 10L, 20L and 50L rotary evaporators. Stainless steel probe length: five inches.
Straight PT100 water bath thermocouple for Across International SolventVap 5L, 10L, 20L and 50L rotary evaporators. Stainless steel probe length: four inches.
Across International one-piece 316L stainless steel 1.5" sanitary tri-clamp to KF25 adapter.
Across International one-piece corrosion-resistant 316L stainless steel 1.5" sanitary tri-clamp to 1/2" female NPT adapter.