Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
Vacuum: 1Pa (mechanical pump) or 5×10-4Pa (molecular pump)Heating elements: molybdenum, platinum, tungsten, graphite can be selected. When choosing graphite as the heating element, the maximum heating temperature is 3000°CThe gap between the two heating elements can be adjusted to different sample thicknesses.High-precision infrared thermometer is optional.
Pressure gauge for Across International's MP24, MP40 and EP40 Pellet Presses
PT100 thermocouple wire, fits all Across International FO series forced air drying ovens (except for FO-29xxx and FO-49xxx series 400C ovens) and AT series vacuum ovens. Total length: 80 inches.
14/20 joint thermometer adapter with PTFE body and Viton O-ring for air tight vacuum work.
24/40 joint thermometer adapter with PTFE body and Viton O-ring for air tight vacuum work.
This flange adapter is for use in the cold trap of our short path distillation system, right where vacuum is pulled from, as well as with our new single cow adapter. The flange adapter has a 13mm internal diameter and converts 24/40 adapters to KF25. Its for use with the bigger pumps. In order to engage the stainless-steel bellows--the tubing which comes...
The flange adapter has a 13mm internal diameter and converts 24/40 adapters to KF25, it also comes with an adapter to 3/8" hose barb. Its for use with the bigger pumps. In order to engage the stainless-steel bellows--the tubing which comes with such pumps, this adapter is required. It has a PTFE body with a Viton gaskets, allowing for corrosion resistant,...
PTFE coated silicone sealing ring for Ai SolventVap series rotary evaporators and R series glass reactors. Center frame is made of solid PTFE.
High quality PTFE extension feeding tube for Ai SolventVap series rotary evaporators. This solvent resistant tube connects to the glass feeding tube and allows you to feed material directly into the evaporating flask.Glass material: high borosilicate glass 3.3
Across International PTFE funnel, specially made for Ai R series glass reactors.
Highly non-sticky PTFE jars. These jars are used whenever small quantity of samples need to be grinded/milled without contamination. Each jar set includes grinding jar, lid, silicon sealing gasket and a mixed size agate grinding balls (see detail table below).
PTFE lid gasket set for Across International R series glass reactors.