Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
The Ai HP11 heats to 350°C on a 11" ceramic-coated aluminum plate and stirs from 110 to 2000 rpm, for batches up to 2 gallon. PID control with digital temperature and speed displays, plus an external PT100 probe (11" stainless, 35" cable) for accurate fluid temperature. 110V, 1,000 W.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
Ai 10L 400C max. beaker heater with temp controller for all types of straight walled beakers. Beakers will be heated from the bottom and around the walls. Avoid overheating, overloading and chemical spillage from shortening service life.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of...
Newly re-designed distillation head with larger vacuum jacket for less heat loss during distillation, increased internal diameter for more efficient fractioning and condensation of vapor with zero clogging. PTFE 24/40 thermo inlet adapters with Viton gasketsAi Heavy wall glassware for durabilityVacuum jacketed vapor channel
Laboratory economic muffle furnace with flap door. Max temperature 1050℃. Recommended ideal running temperature is 850℃~900℃Great for small sample heating in researchChamber built with high quality Mitsubishi (Japan) alumina ceramicCompact, lightweight and ideal for benchtop use & installation in a glove box.
Great for drying and sterilization.Built-in temperature calibration.Forced-air circulation combined with digital temperature control achieves dependable and uniform environment for a variety of laboratory applications.Corrosion resistant stainless steel interior finish with toughened double glazing observation window.
Newly re-designed distillation head with larger vacuum jacket for less heat loss during distillation, increased internal diameter for more efficient fractioning and condensation of vapor with zero clogging.PTFE 14/20 and 24/40 thermo inlet adapters with Viton gasketsAi Heavy wall glassware for durabilityVacuum jacketed vapor channel
AT09e series digital desktop vacuum ovens feature a 0.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak...