Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
High quality glass vapor duct with sealing gasket for Ai SolventVap series rotary evaporators.Ai 1st Gen small-neck 10L evaporation flask mouth dimensions : ID 3 inches, OD 3 3/4 inchesGlass material: high borosilicate glass 3.3
High quality PTFE sealing kit (two pieces) for Ai SolventVap series 2L and 5L rotary evaporators.Attention! Please install sealing gaskets in the direction illustrated in the manual. Incorrect installation may cause unit to leak.
Glass elbow with PTFE open/close valve, fits Ai 5L SolventVap rotary evaporators. This elbow connects condenser and receiving flask, allowing you to remove the receiving flask without losing vacuum.QuickClamp size: 40#Glass material: high borosilicate glass 3.3
Evaporation flask cap for Ai 5L rotary evaporators with small-neck evaporation flask. Does NOT come with sealing seal and positioner. Ai 5L evaporation flask mouth OD: 2 inches, mouth ID 1 3/8 inches.
Plastic condenser tightening cap for Ai 2L SolventVap series rotary evaporators. Comes with tension spring to help properly install your condenser.
Across International Conical Centrifuge Tubes are made of high-quality Polypropylene and are autoclavable up to 121°C. These clear centrifuge tubes are ideal for applications like sample preparation, sample storage, cell culture, microbiology, and life-science research.
Ai 600mL heavy wall Buchner funnel with coarse frit, allowing you for vacuum filtering and separating solids from liquids.Attention! If working with cold liquids, it is strongly recommended to place the Buchner funnel in a freezer for 20 minutes before use. This will greatly minimize the risk of breaking due to sudden temperature changes.Glassware does...
Across International Universal Pipette Tips are the premier choice for liquid handling and applications ranging from mycology and microbiology to life-science research and analytical chemistry. Choose from racked or bagged options, as well as sterile and non-sterile pipette tips.
This flange adapter is for use in the cold trap of our short path distillation system, right where vacuum is pulled from, as well as with our new single cow adapter. The flange adapter has a 13mm internal diameter and converts 24/40 adapters to KF25. It's for use with the bigger pumps. In order to engage the stainless-steel bellows--the tubing which comes...
Ai high quality glass feeding tube with PTFE open/close valve for Ai SE13 5L SolventVap series rotary evaporators. This tube is to be used with a PTFE extension tube (not included here) so that material can be routed directly into the evaporating flask.
AC Contactor for Across International Split Tube Furnaces
Grinding jar clamping device for Across International PQ-N2 (4x500ml) planetary ball mills. Size is 4.75"W x 5.25"H.