Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.Power failure protection resumes furnace operation right after the point of failure when power is reestablished.Limit switch turns off furnace once top is open.
Rubber Vacuum Release Valve Cap for AT Series Vacuum Ovens
4 Specifications: 0.5mL Self-standing, 1.5mL Self-standing, 1.5mL Conical bottom, 2.0mL Self-standing,0.5 mL Self-standing, 1.5 mL Self-standing, 1.5 mL Conical bottom,2.0 mL Self-standing, meeting demands of different applications.Round Bottom, Self-standing: 3 styles with self-standing round bottom design, making the vial placed on the lab workbench...
Santovac 5 Diffusion Pump Oil (do NOT fill more than 30mL oil at a time).
This service kit is made for use with Across International SE05 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, a new vapor duct, and a feed tube.
This service kit is made for use with Across International SE05x SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, a new vapor duct, and a feed tube.
This service kit is made for use with Across International SE13 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, vapor duct, feed tube, PTFE open/close...
This service kit is made for use with Across International SE130 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, vapor duct, feed tube, PTFE open/close...
This service kit is made for use with Across International SE26 gen1 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, vapor duct, feed tube, PTFE...
This service kit is made for use with Across International SE26 gen2 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, vapor duct, feed tube, PTFE...
This service kit is made for use with Across International SE53 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL barbs and caps, PTFE sealing gaskets, vapor duct, feed tube, PTFE open/close...
Sealing gasket set for Across International's pellet presses. Each set includes three silicon o-rings, one copper ring and one 6mm diameter stainless steel ball.