Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
Across International glass drain Port with PTFE on/off valve, specially made for Ai R series glass reactors. Glass material: high borosilicate glass 3.3OD: 70mm, PTFE length: 28 cmOD: 80mm, PTFE length: 28 cm
50ml Stainless Steel Vacuum Jacket (Item# MVSSC.50)
Ai 5L heavy wall, 2-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with one vertical 34/45 neck and one angled 24/40 side neck.Glass material: high borosilicate glass 3.3.Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your...
The newly redesigned Ai heavy wall 5L short path distillation head with vacuum jacket.
The Ai heavy wall 2L packable short path distillation head with vacuum jacket offers you a lot of new changes over its previous version.
High quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai R series glass reactors.This jacket will greatly increase the efficiency of your recirculating chiller, it will extend the life of the chiller compressor, allow your coolant temperature to go further down, and cut...
The new Ai 50L evaporation flask carrier is 2X stronger than its predecessor. Introducing the Ai stainless steel 50L evaporating flask carrier with silicone cushions, custom made for Ai 50L SolventVap series rotary evaporators. This carrier can be placed on top of our 50L SolventVap's water bath for safe and easy loading and unloading; it can also serve...
High quality glass auxiliary condenser for Ai SE26 10L SolventVap series rotary evaporators. This condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That's why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly system....
Across International’s PT100 Thermocouple with LEMO Connector is the perfect choice for integrating your Ai SR series reactor into a temperature control device. This option replaces the standard, independent, thermocouple already present in your Ai reactor, with one that will allow for select temperature control units to read and operate based on the...
Introducing the new Ai separatory funnel kits with all PTFE valves. A separatory funnel, also known as separation funnel, separating funnel, or colloquially sep funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into two immiscible solvent phases of different densities....
Round single bore, open both endsAlumina: > 99.5%; Fe2O3: < 0.01%100% imperviousDensity: > 3.8 g/cm3
The Ai ultra-thick insulating tops will keep your distillation setup at the peak of its performance, they will help prevent vapor condensation in the upper half of a flask, at the same time, protect the flask, the solutions, and the lab from drafts, which would disturb the reflux ration during fractionation, from flying glass of flask implosions in high...