Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
This service kit is made for use with the Across International Clear 2w short path distillation system. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL16 connectors and caps, Keck clips, PTFE thermometer adapter, center...
This service kit is made for use with the Across International Clear 5w short path distillation system. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL16 connectors and caps, Keck clips, PTFE thermometer adapter, center...
A set of 10mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 10mm diameter cylinder-shape pellets.
Dual-diaphragm rebuild kit for DTC-41 1.6 CFM dual-stage chemical duty diaphragm pumps.
A set of 13mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 13mm diameter cylinder-shape pellets.
A set of 15mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 15mm diameter cylinder-shape pellets.
High purity (99.9%) heat resistant graphite crucible with flat bottom. Maximum casting capacity: 22 Lb, good for use with induction heating, recommended for precious metals casting. Compatible with 15kW low-frequency induction heaters for melting manufactured by Across International.Graphite, often called black lead, can tolerate thermal shock and...
One flange with vacuum gauge and valveOne flange with valveFour high temperature silicone o-ringsSecuring screws
Dual main condenser bridge for Ai 20L & 50L SolventVap rotary evaporators. The Ai dual 20L & 50L main condenser setup allows you to increase your SolventVap rotary evaporator condensation rate up to 75%.QuickClamp size: 80#Glass material: high borosilicate glass 3.3Height 7.5" ~ 19 cm
One-piece, food grade Viton door sealing gasket, specially made for Ai Elite 4.4 cubic feet vacuum ovens, they are good for sealing and maintaining vacuum level within the oven chamber.Viton gaskets are highly impermeable to many strong organic solvents that would destroy or permeate commonly used gaskets. Maximum temperature on Viton gasket 200 Celsius...
One Shimaden FP93 temperature controller with 40-segment PID ramp controls.Compatible with the following products by Across International:
Ai 24/40 standard taper joint, heavy wall single cow distribution adapter with PTFE open/close valve, one 24/40 vacuum port, and one GL16 vacuum release port. Three viton gaskets on PTFE open/close valve and one viton gasket on the 24/40 drain port.Glass material: high borosilicate glass 3.3.Glassware does not have warranties. Glassware may have minute...