Ethylene Glycol Inhibited Industrial Grade -50c

Extractor King Inhibited Ethylene Glycol Anti-freeze & Heat Transfer Fluid is specially formulated by us to be used as an an industrial grade chiller and heat transfer fluid made to stand up to todays demanding industry requirements. Ideal for chillers and heating devices requiring ultra low temperatures to -50c. 

Product

• Product code: EG403 — Ethylene Glycol, Industrial Grade, Inhibited

• Net weight: 21 kg

• Appearance: yellow-green liquid

• pH: 10 ±0.5

• Specific gravity: 1.11 to 1.14

Description and Use

Coolant or antifreeze for closed loop heating or cooling systems. EG403 is full strength, industrial grade inhibited ethylene glycol. Dilute with softened water, or clean potable water with a hardness concentration of less than 150 mg/L total hardness (as CaCO₃). Consult the EG403 Product Bulletin for additional information.

Safety Ratings

• Health: 1   Flammability: 1   Reactivity: 0   Protective equipment: B

• Risk phrases: harmful by inhalation, ingestion or skin absorption. May cause irritation of skin and eyes.

• Precautionary measures: neoprene gloves, safety glasses or goggles. Avoid contact with eyes, skin and clothing. Do not reuse this container for any purpose unless properly reconditioned. Keep out of reach of children.

First Aid

• If inhaled: remove to fresh air and apply appropriate first aid treatment as necessary.

• Skin contact: remove contaminated clothing and wash the affected skin with soap and water.

• Eye contact: immediately flush eyes with plenty of low-pressure water for at least 15 minutes. Get immediate medical attention.

• If swallowed: give plenty of water to dilute the product. Do not induce vomiting. Seek medical help promptly.

Read the Safety Data Sheet before using.

Regulatory Information

• WHMIS: regulated, D2A

• TDG: not TDG regulated. UN: not applicable.

• Proper shipping name: Ethylene Glycol