Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
A set of 13mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 13mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250C.
High purity (99%) heat resistant graphite crucible with flat bottom. Maximum casting capacity: 88 Lb, good for use with induction heating, recommended for precious metals casting. Compatible with 35kW low-frequency induction heaters for melting manufactured by Across International.Graphite, often called black lead, can tolerate thermal shock and...
Across International DigiM 10L heating and stirring mantle come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.
This service kit is made for use with Across International SE13 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL18 connectors, PTFE sealing gaskets, vapor duct, feed tube, PTFE open/close...
A set of 40mm diameter (ID) hardened steel trapezoidal split sleeve dry pressing die set for pellet presses, ready for you to make 40mm diameter cylinder-shape pellets.These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with pellet ejector make sample...
A set of 25 x 25 mm hardened steel trapezoidal split sleeve dry pressing die set for pellet presses, ready for you to make 25 x 25 mm square pellets.These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with pellet ejector make sample releasing a snap.
A set of 25mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 25mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250C.
A set of 76mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 76mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250C.
The new Ai dual 10L receiving flask kit allows you to switch between two receiving flasks, without interrupting your 20L rotary evaporator's operation.Includes one additional receiving flask; the bridge lets you switch between it and your evaporator's existing receiving flask without stopping the evaporator.
A set of 50mm diameter (ID) hardened steel trapezoidal split sleeve dry pressing die set for pellet presses, ready for you to make 50mm diameter cylinder-shape pellets.These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with pellet ejector make sample...
This service kit is made for use with Across International SE26 gen1 SolventVap rotary evaporators. The service kit is intended to replace the primary seals and gaskets that may fail over time, as well as basic components that can easily be lost, broken, or damaged. Items include GL18 connectors, PTFE sealing gaskets, vapor duct, feed tube, PTFE...