Across International
Laboatory & Processing Equipment
No products
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
|
Extraction & Vacuum Extractors, complete systems and vacuum. |
Temperature Control Chilling, freezing, drying and ovens. |
Separation Evaporation, distillation and filtration. |
Life Science & Safety Incubation, containment and sterile work. |
|
Extractor Parts & Accessories Everything to build or service a closed loop system. |
Equipment Parts Replacement parts and accessories by equipment. |
|
Supplies Solvents, fluids, media and safety. |
Laboatory & Processing Equipment
Dual-diaphragm rebuild kit for UDP6 6 CFM chemical duty diaphragm pumps.
Ai 20L heavy wall, 3-neck round bottom flask with 24/40 and 45/50 standard taper joint. Comes with two vertical 45/50 side necks and one 24/40 center neck.Glass material: high borosilicate glass 3.3.Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your...
A set of 76mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 76mm diameter cylinder-shape pellets.
A set of 13 x 13 mm hardened steel trapezoidal split sleeve dry pressing die set for pellet presses, ready for you to make 13 x 13 mm square pellets.These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with pellet ejector make sample releasing a snap.
Ai 50L large-neck, heavy wall, high quality round evaporation flask for SolventVap SE130 50L rotary evaporators. Large-neck design allowing you to reach inside the flask for easy cleaning. Outer diameter: 17.5 inches, mouth OD: 5 inches, mouth ID 4 inches, glass material: high borosilicate glass 3.3.
A set of 50mm diameter (ID) hardened steel dry vacuum pressing die set for pellet presses, ready for you to make 50mm diameter cylinder-shape pellets in a vacuum condition.
A set of round easy-retrieve 25mm diameter (ID) hardened steel trapezoidal split sleeve dry pressing die set for pellet presses, ready for you to make 25mm diameter cylinder-shaped pellets.These die sets are professionally built for you to work with samples that tend to stick to the inner surface of the sleeve, trapezoidal split inner sleeves with pellet...
Across International DigiM 5L heating and stirring mantle come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds.
High quality glass main condenser for Ai SE130 50L SolventVap series rotary evaporators. This condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That's why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly system.Condensing...